Button Tone Module.
Ready for field installation! Provides
audible beep upon completion of call entry. |
| 7501.9067 |
125 VDC |
| 7501.9068 |
48 VDC |
| 7501.9069 |
24 VDC |
| |
2 Button Tone Modules.
Used in hall stations to satisfy audible
call registration acknowledgement requirements. This module
will provide an audible beep every time the button is depressed. |
| 7501.9093 |
Works on 24 - 31 VDC |
| 7501.9094 |
Works on 45 - 55 VDC |
| 7501.9095 |
Works on 110 - 135 VDC |
| |
8 Button Tone Modules.
Used in car stations to satisfy audible call registration acknowledgement
requirements. Each module will handle a maximum of 8 buttons
and can be used in combination. |
| 7501.9096 |
Works on 24 - 31 VDC |
| 7501.9097 |
Works on 45 - 55 VDC |
| 7501.9098 |
Works on 110 - 135 VDC |
| |
| Two Stroke Gong Module. |
| 7501.9007 |
125 VAC/DC 3 wire hookup. Indicates Up direction on arrival
at landing by ringing once. Down direction by ringing twice.
Chime not included. Use one per hall station. |
| |
| Two Stroke Machine Room Gong. |
| 7501.9008 |
Indicates Up direction on arrival at landing by ringing once.
Down direction by ringing twice. Length of 1st chime and off
delay between chimes are adjustable. Hook-up simple for either
new or retrofit application. Chime not included. Only one per
car. |
| |
| Multi Lane Stepper Mother Board. |
| 7501.9090 |
4 Lane Stepper with AC or
DC inputs. Handles up to 32 landings. Available in 12, 24,
48, 110V AC/DC. |
| |
| Multi Lane Stepper Relay Board. |
| 7501.9091 |
For use with 7501.9090. 8
Landings per board. |
| |
| Universal Relay Board. |
| 7502.9008 |
Need to add a relay and keep
it neat?!! This general purpose relay board may be your answer!
It’s customized to your request. Available in +5VDC, +12VDC,
+24VDC, +48VDC, +120VDC and 120VAC. Capable of holding up to
8 relays Mix and match voltages! Quick and easy to install
or remove! |
| |
| Edgewipes. |
| 7504.9001 |
Used for removal of organic materials and/or corrosion,
etc. from card edge connectors of circuit boards. Leaves surface
clean, conductive, low resistive. Does not remove gold, solder
or copper plating. |
replacement elevator boards, tools, and services
My
Account 
Service Tools
Ask A Question
